非富勒烯受体DA'D型稠环单元的结构修饰及电池性能研究

近年来,设计和合成高性能非富勒烯受体(NFAs)材料已经成为太阳能电池研究领域的前沿课题。基于DA'D型稠环结构的NFAs由于具有吸光系数高、能级和带隙可调、结构易于修饰、分子可高效合成、光电学性能优异等优点而受到了越来越广泛的关注。在短短7年的时间里,能量转换效率(PCE)从3%~4%提高到18%。2019年初邹应萍等报道了一个优秀的受体分子Y6,与PM6共混制备单结电池,获得了15.7%的能量转换效率。Y6类受体材料的中心给电子单元为DA'D型稠环结构,缺电子单元(A')通过氮原子与两个给电子单元(D)并联形成稠环结构,这有助于降低前线分子轨道能级并增强吸收,同时与氮相连的两个烷基链和位于噻吩并噻吩β位的两个侧链则有助于提高溶解度及调节结晶性。自Y6问世以来,人们对分子的结构剪裁进行了深入的研究,并报道了数十种新的结构。在这些新的受体中,DA'D部分的结构裁剪对提高器件效率和太阳能电池的性能起着至关重要的作用。本文对A'、D单元和侧链结构修饰的研究进展进行了综述。通过选择几组受体,对最近报道的分子进行分类,并将它们的光学、电化学、电学和光电性质与精确的结构修饰相关联,从而对结构-性能关系进行全面概述。     

Law of the iterated logarithm for random graphs

A milestone in probability theory is the law of the iterated logarithm (LIL), proved by Khinchin and independently by Kolmogorov in the 1920s, which asserts that for iid random variables with mean 0 and variance 1 In this paper we prove that LIL holds for various functionals of random graphs and hypergraphs models. We first prove LIL for the number of copies of a fixed subgraph H. Two harder results concern the number of global objects: perfect matchings and Hamiltonian cycles. The main new ingredient in these results is a large deviation bound, which may be of independent interest. For random k‐uniform hypergraphs, we obtain the Central Limit Theorem and LIL for the number of Hamilton cycles.     

Insight into shear‐induced modification for improving processability of polymers: Effect of shear rate on the evolution of entanglement state

Many experimental results have revealed that the re‐entanglement kinetics of disentangled polymers is much slower than that predicted by tube theory. This retarded recovery of fully entangled state is of practical significance that shear‐induced modification may offer a way to improve processability for a polymer by reducing viscosity. This work tried to figure out the shear‐rate dependence variation of viscosity in the view of evolution of entanglement state through disentanglement and re‐entanglement, aiming to provide fundamental insights into application prospect of shear‐induced modification in preparing “in‐pellet” disentangled polymers prior to final processing. High‐density polyethylene was sheared on a parallel‐plate rotational rheometer with a linearly increased shear rate. Results showed that higher shear rate could induce further disentanglement, resulting in a lower viscosity with a reduction rate up to 93.7%, larger molecular weight between entanglements M_e , and longer re‐entanglement time. Additionally, less entanglement would give a larger lamellar thickness of sheared samples after nonisothermal crystallization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 598–606     

Shedding vortex simulation method based on viscous compensation technology research

Owing to the influence of the viscosity of the flow field, the strength of the shedding vortex decreases gradually in the process of backward propagation. Large-scale vortexes constantly break up, forming smaller vortexes. In engineering, when numerical simulation of vortex evolution process is carried out, a large grid is needed to be arranged in the area of outflow field far from the boundary layer in order to ensure the calculation efficiency. As a result, small scale vortexes at the far end of the flow field cannot be captured by the sparse grid in this region, resulting in the dissipation or even disappearance of vortexes. In this paper, the effect of grid scale is quantified and compared with the viscous effect through theoretical derivation. The theoretical relationship between the mesh viscosity and the original viscosity of the flow field is established, and the viscosity term in the turbulence model is modified. This method proves to be able to effectively improve the intensity of small-scale shedding vortexes at the far end of the flow field under the condition of sparse grid. The error between the simulation results and the results obtained by using fine mesh is greatly reduced, the calculation time is shortened, and the high-precision and efficient simulation of the flow field is realized.     

The Effect of Viscosity on the Diffusion and Termination Reaction of Organic Radical Pairs

The effect of viscosity on the diffusion efficiency (F_dif) of an organic radical pair in a solvent cage and the termination mechanism, that is, the selectivity of disproportionation (Disp) and combination (Comb) of the geminated caged radical pair and the diffused radicals encountered, were investigated quantitatively by following the photolysis of dimethyl 2,2′-azobis(2-methylpropionate) (V-601) in the absence and presence of PhSD. F_dif and Disp/Comb selectivity outside the cage [Disp_(dif)/Comb_(dif)] are highly sensitive to the viscosity. In contrast, the Disp/Comb selectivity inside the cage [Disp_(cage)/Comb_(cage)] is rather insensitive. The difference in viscosity dependence between Disp_(cage)/Comb_(cage) and Disp_(dif)/Comb_(dif) is explained by the spin state of the radical pair inside and outside the cage and the spin state dependent configurational changes of the radical pair upon their collision. Given that the configurational change of the radicals associates the displacement and reorganization of solvents around the radicals, the termination outside the cage, which requires larger change than that inside the cage, is highly viscosity dependent. Furthermore, while the bulk viscosity of each solvent shows good correlation with F_dif and Disp/Comb selectivity, microviscosity is the better parameter predicting F_dif and Disp_(dif)/Comb_(dif) selectivity regardless of the solvents.     

Enhancing the Viscosity-Sensitive Range of a BODIPY Molecular Rotor by Two Orders of Magnitude

Molecular rotors are a class of fluorophores that enable convenient imaging of viscosity inside microscopic samples such as lipid vesicles or live cells. Currently, rotor compounds containing a boron-dipyrromethene (BODIPY) group are among the most promising viscosity probes. In this work, it is reported that by adding heavy-electron-withdrawing −NO₂ groups, the viscosity-sensitive range of a BODIPY probe is drastically expanded from 5–1500 cP to 0.5–50 000 cP. The improved range makes it, to our knowledge, the first hydrophobic molecular rotor applicable not only at moderate viscosities but also for viscosity measurements in highly viscous samples. Furthermore, the photophysical mechanism of the BODIPY molecular rotors under study has been determined by performing quantum chemical calculations and transient absorption experiments. This mechanism demonstrates how BODIPY molecular rotors work in general, why the −NO₂ group causes such an improvement, and why BODIPY molecular rotors suffer from undesirable sensitivity to temperature. Overall, besides reporting a viscosity probe with remarkable properties, the results obtained expand the general understanding of molecular rotors and show a way to use the knowledge of their molecular action mechanism for augmenting their viscosity-sensing properties.     

Recent developments of di-amide/imide-containing small molecular non-fullerene acceptors for organic solar cells

Non-fullerene organic solar cells have received increasing attentions in these years, and great progresses have been made since 2013. Among them, aromatic di-amide/imide-containing frameworks have shown promising applications. The outstanding properties of them are highly associated with their unique electronic and structural features, such as strong electron-withdrawing nature, broad absorption in UV-visible region, tunable HOMO/LUMO energy levels, easy modifications, and excellent chemical, thermal and photochemical stabilities. In this review, we give an overview of recent developments of aromatic diamide/imide-containing small molecules used as electron acceptors for organic solar cells.     

Viscosity solutions to a parabolic inhomogeneous equation associated with infinity Laplacian

We obtain the existence and uniqueness results of viscosity solutions to the initial and boundary value problem for a nonlinear degenerate and singular parabolic inhomogeneous equation of the form ut- ΔN∞u = f,where ΔN∞denotes the so-called normalized infinity Laplacian given by ΔN∞u =1|Du|2 D2 uD u, Du.     

Intra‐ and inter‐supramolecular complexation of poly(butyl methacrylate)‐co‐2‐(1,2,3‐triazol‐4‐yl)pyridine copolymers induced by CoII,FeII, and EuIII ions monitored by molecular hydrodynamics methods

Poly(butyl methacrylate) copolymers embedding bidentate 2‐(1,2,3‐triazol‐4‐yl)pyridine (trzpy) chelating units as comonomer in the side chains were synthesized by controlled radical addition‐fragmentation transfer (RAFT) polymerization. Intracomplexation and intercomplexation of the macromolecules of the poly(butyl methacrylate) copolymers containing 20 % mol of trzpy units induced by Co^II, Fe^II, and Eu^III ions were studied in the solutions by macromolecular hydrodynamics methods. The sedimentation velocity of extremely diluted copolymer solutions and the dynamic viscosity of moderately diluted solutions were studied in a wide range of the salts concentrations. Differences were observed with respect to the copolymer behavior in the presence of the Co²⁺, Fe²⁺, Eu³⁺ ions. These differences are namely due to the differences in the number of coordination bonds required for complex formation and not explicitly to the nature of the corresponding anions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2632–2639